Graphite
Stacked graphene layers, crystalline.
0.335 nm spacing betwwen planes.
About 10% volume expansion upon
Li intercalaion
Theoretical maximum capacity is
372mAl/g(LiC6)
Coating by Conductive Materials
The major effects and advantages
No classical binder is required to prepare mechanically and electrochemically stable anodes.
Irreversible capacity in the first cycle
We have a tendency to think CO2 is negative. Because of Global warming. But, In other face, CO2 is very useful to use.
As you can see we use Co2 in various ways. For example, in our lives, we can see Co2 in beverages, and in concert, we see Co2 in form of gas.
Anyway, Today I explain to you about this, Electrochemical reaction. We convert Co2 to other materials using electrochemical reaction.
Super-capacitors
EDLC(electrochemical double layer capacitors)
→ store E using ion adsorption
Pseudo-capacitors
→ fast surface redox reactions
→ higher capacitance than EDLC
Redox super-capacitors
electron transfer caused by electrochemical oxidation and reduction of active reagents
between two electrodes with different potentials
charge transfer properties
investigating
Histologically, the islets consist of three major and at least two minor cell types.
Beta cells, which synthesize and secrete insulin, make up about 60% of a typical islet.
Alpha cells are the source of glucagon, 30% of islet tissue.
Delta cell, which are less abundant, produce somatostatin.
F cells, which secrete pancreatic polypeptide.
Fifth cell type that secretes ghrelin.
Fifty cell typ
synthesis gas or syngas and mainly consists of carbon monoxide and hydrogen. The gas is cooled and undesirable components, such as carbon dioxide and sulphur are removed. The gas can be used as a fuel or further processed and concentrated into a chemical or liquid fuel.
Integrated gasification combined-cycle (IGCC) systems combine a coal gasification unit with a gas fired combined cycle power
이온성 액체의 원리
이온성 액체는 상온에서 이온들의 결합으로 구성되었음에도 액체 상태로 존재하는 물성을 지닌 물질을 말한다.
일반적으로 양이온과 음이온이 우 매우 강한 인력에 의해 고체 상태로 존재하는 것이 일반적인 거동이나 특정 양이온과 음이온의 선택에 따라 상온에서 액상
상업적으로 쓰이는 리튬 이차 전지는 양극(cathode) 재료로써 주로 LiCoO2를 이용하는데, 층상 암염형 구조로서 CoO6팔면체로 이루어진 층간에 Li+이온이 삽입된다. 이 공간에 Li+이온이 삽입되는 과정이 충전, 탈리 되는 과정이 방전이다. LiCoO2에서 삽입과 탈리 그리고 내부 격자 내 이동은 거의 가역적으로서
▶광활성층 표면의 균일함은
RMS를 통해 확인할 수 있음
▶Alkyl side chain의 도입으로
P2의 RMS가 P1 보다 높음
Polymer 중합
Suzuki coupling을 통해 P1 & P2를 중합하는데 성공
분자량의 증가 : P1 : 4.7×103 → P2 : 10.1×103 ( Mn )
Alkyl side chain의 도입으로 분자량이 증가한 것으로 생각됨
광화학
염료 감응형 태양전지는 반도체 접합형 태양전지와는 달리, 고체/액체 접합의 광전
기화학형이며 가시광선을 흡수하여 전자-홀 쌍 (electron-hole pair)을 생성할 수 있
는 감응성 염료분자와, 생성된 전자를 전달하는 전이금속 산화물을 주된 구성 재료
로 하는 광전기 화학적 태양전지이다. Fig. 2.2. 에서
18세기에 이르러 화학이론의 발전은 우선 연소현상(燃燒現象) 의 설명에 있었다. 특히 기체화학에 있어서 커다란 발전을 보여 수소·질소·일산화탄소·암모니아·염소·산소 등이 발견되었다.
이들을 토대로 하여 19세기에 들어서 영국의 J.돌턴에 의해 원자설(原子說) 이 제안되어 종래에 관측된 여러